Ultra Thin Metal Case LED Strips Power Supply 12V 33A 400W Adjustable
Ultra Thin Metal Case 12V 33A 400W Slim 30mm Switch Power Supply
Features:
1, Small size, high power;
2, Wide range of AC input voltage;
3, Short circuit, overload, overvoltage protection;
| DC Output | DC Voltage: 12V |
| DC Current : 33A |
| Ripple & Noise: 80MV |
| DC Adjustable Range: ±10% Rated Voltage |
| Voltage Tolerance: ±2.0% |
| Line Regulation: ±0.5% |
| Load Regulation: ±1% |
| Setup,Rise Time,Hold Up Time:200ms,50ms, 20ms/230VAC |
| AC Input | AC Voltage Range: 85-264VAC |
| Frequency Range: 47-63Hz |
| Efficiency:90% |
| AC Current: 0.86/115V 0.4A/230V |
| AC Inrush Current: 20A/115V 40A/230V |
| Leakage Current< 0.5mA /240VAC |
| Protection | Over-load: 105%-150% hiccup mode,Auto-recovery |
| Over-voltage: 115%-135% Cut Off the Output,Auto-recovery |
| Over-temp. : Shut down O/P voltage, Auto-recovery |
| Environment | Working temp.: -10~ +60C° (Refer to output load derating curve) |
| Working Humidity:20 ~ 90% RH, non-condensing |
| Storage Temp.: -10~ +60C° |
| Storage Humidity: 10 ~ 95% RH |
| Safety | Isolation Resistance:I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC / 25C°/ 70% RH |
| Withstand Voltage: I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Safety standards: CE,RoHS,FCC,ISO9001 |
1. All parameters 230VAC input, rated load, ambient temperature 25 ℃, measured under conditions of 70% humidity;
2. Accuracy: includes set up tolerance, line regulation, load regulation and so on;
3. Ripple Test: 30cm long strands connect the power supply and the load on the load side and 0.1u and 47u capacitor to 20MHz oscilloscope measured at the load end;
4. Line regulation: at rated load conditions, the input voltage changes from low to high measured;
5. Load regulation: the measured output load from 20% to 100% load change measured, other load is fixed at 60% of the load;
FAQ
Q1. Can I have a sample order for power supply?
A1: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2: Do you accept OEM/ODM for the switching power supply ?
A2: Yes. we do.
Q3: How about the quality?
A3: We have the better professional and experienced engineers team and strict QA and QC system.Repair rate under 0.1%~0.2%
Q4: What is PFC?
A4: PFC stands for Power Factor Correction. The purpose of PFC is to improve the ratio of apparent power and real power. The power factor is only 0.5~0.7 in non-PFC models. In PFC models, the power factor can reach above 0.9. The calculation formulas are as below:
Apparent Power=Input Voltage x Input Current (VA)
Real Power= Input Voltage x Input Current x Power Factor (W)
Products Imagine:
Product Tags:
|
|
Ultra Thin Metal Case LED Strips Power Supply 12V 33A 400W Adjustable Images
|
